Element ESTR 200, User Manual

Page: 8 / 19

Connecting the speakers
Connecting the wires
Connecting the main speakers
The two main speakers should be set between 6 and 10 feet apart. Putting the speakers too closer or
further may cause sound distortion.
The speakers should also form a 45 degree angle to the central listening point in the room, creating a
triangle of listening enjoyment.
Connecting the antennas
1. Set up the AM and FM loop antenna, then connect it
to the terminals on this unit.
2. Orient the AM and FM loop antenna for the best
reception.
Method 1
Method 2
1. Loosen the knob.
2. Insert the bare wire.[Remove approx.5mm(1/4 )
insulation from the speaker wires].
3. Tighten the knob and clip the wire or may use
banana plug.
Speaker polarity
When connecting the speakers, make sure the
polarities("+" speaker wire to "+" receiver)
of speaker wires and terminals are matched.
Incorrect connecting causes sound distortion and
bass lack.
Note:
Do not let the bare speaker wires touch each
other or any metal part of this units, which would
damage this unit or the speakers, or both.
Connect the speaker terminals to your speakers
with the proper wire ( as short as possible).
if the connections are faulty, no sound will be heard
from the speakers.
5
FIRST THINGS