USER MANUAL
10
FOR SUPPORT, VISIT ELEMENTELECTRONICS.COM/SUPPORT
11
CONNECTIONS
Press
STANDBY
button on the remote control to power on the sound bar,
then press button on the remote control to switch the Bluetooth
mode. Th e word
BT
will be shown on the display screen.
If aft er several seconds you do not see
BT
on the screen, the sound bar is
still searching for a signal and you can follow these steps:
Pairing a device or connecting a paired device:
1. Press and hold the button on the remote control. Use your
smart device to search for the Bluetooth signal of the sound bar.
2. Select
ESBAB21RTR
on your list and input the password 0000
if there is a password prompt.
3. Th e sound bar will then sync to play from your device.
When the word
BT
appears and a beep is heard, it means
you are connected successfully.
Disconnecting a device:
Press and hold the button on the remote control. When it
successfully disconnects the screen will show no
BT
.
Bluetooth
Bluetooth
TM
TIP:
Bluetooth connection
range is 10 meters.
In Bluetooth mode,
[PLAY/PAUSE], [NEXT],
[PREVIOUS], [/-]
etc. are also active.
CONNECTIONS
(continued)
Th e subwoofer will receive the wireless audio signal
from the sound bar. When the indicator light is fl ashing
RED, the subwoofer is searching for the wireless signal.
When the indicator light turns solid BLUE, it means the
subwoofer and sound bar are now connected.
TIP:
During the connection of the sound bar and
subwoofer, users should not press the PAIR button on
the subwoofer or it will cause them to disconnect.
Press and hold the button on the sound bar to
disconnect it and the indicator light will fl ash RED on
the subwoofer. Press and hold the button again
and the sound bar will reconnect with the subwoofer,
and the indicator light will turn solid BLUE.
Connecting the subwoofer
to the soundbar:
PAIR
If the sound bar and subwoofer do not connect automatically you can follow these steps:
1. Press the
PAIR
button on the subwoofer to reset it and the red indicator light will
fl ash quickly (twice per second).
2. In LINE mode, press the
POWER
button on the sound bar for 5 seconds to reset it,
and the sound bar will enter standby. Press the
POWER
button to power on and
the sound bar will automatically pair and connect to the subwoofer.
PAIR
BUTTON
Summary of Contents for ESBAB21RTR
Page 11: ...Bring it home TM...
