4
Product Features
Due to technological innovations, the product descriptions in this manual may not be completely consistent with your
refrigerator. Detailed information is in accordance with the final product.
II.
Preparations for use
Installation location:
1.
Ventilation condition
The position you select for the refrigerator installation should be well-ventilated and has less hot air. Do not locate the
refrigerator near a heat source such as cooker, and avoid it from direct sunlight, thus guaranteeing the refrigeration effect
while saving energy consumption. Do not locate the refrigerator in the damp place, so as to prevent the refrigerator from
rusting and leaking electricity.
The result of the total space of the room in which the refrigerator is installed being divided
by the refrigerant charge amount of the refrigerator shall not be less than 8 g/ M
3
.
Note: The amount of refrigerant charged for the refrigerator can be found on the nameplate.
2.
Heat dissipation space
When working, the refrigerator gives off heat to surroundings. Therefore, at least
30mm
of free space should be spared at
the top side, more than 100mm on both sides, and above 50mm at the back side of the refrigerator.
Dimensions in mm:
W
D
H
A
B
C(
°
)
E
F
710
770
1855
1197
1357
130
50
100
Note
：
Figure 1, Figure 2 only illustrate the space demand of the product.
3.
Level ground
Place the refrigerator on the solid and flat ground (floor) to keep it stable, or else, it will give rise to vibration and noise.
When the refrigerator is placed on such flooring materials as carpet, straw mat, polyvinyl chloride, the solid backing plates
should be applied underneath the refrigerator, so as to prevent color change due to heat dissipation.
Unobstructed ventilation shall be maintained around the appliance or in an embedded structure.
No
Description
1
Temperature control knob
2
Glass shelves
3
Freezer drawer
4
Adjustable Feet
5
Little Bottle racks
6
Bottle rack
