3
ELECTRICAL
BOX COVER
1
TAB
Connect Power to the Housing
3A
Push the tab on the housing electrical box up and remove
the electrical box cover.
1
BUTTERFLY
BRACKET
TRIM HOLDER
WING NUT
1
2
NOTE:
Notches in trim holder can be used to
align multiple housings using a laser or string.
NOTCH
Install the Housing with Butterfly
Brackets
2A
Slightly loosen the wing nut to slide the butterfly bracket
up or down.
After achieving the proper location, tighten the wing nut
to secure the butterfly bracket in place.
Repeat steps 1 and 2 on for the other butterfly bracket.
Utilize the butterfly brackets to install the housing in
accordance with local electrical codes.
1
2
3
4
NOTE:
Notches in trim holder can be used to
align multiple housings using a laser or string.
NOTE:
Skip this section if installing the housing
with adjustable bars.
3B
Install the conduit to the housing electrical box.
2
WARNING:
RISK OF FIRE:
When using the
housing electrical box for power feed through,
use
4 - #12
, or 6 - #14
branch
MAX
AWG
AWG
circuit wires.
CONDUIT
2
Summary of Contents for E3 F Series
Page 7: ...7 ...
