31
Troubleshooting
Problem
Possible causes
Remedy
No electricity
Check mains connection
Defective cable
Check cable, plug in, replace if required, or have it repaired by
a qualified person
Defective safety switch/plug combination
Arrange for repair in a specialist workshop
1. Working depth too large, set to the shorter depth
2. Cylinder blocked, remover the blockage
3. Grass too long, mow the lawn before operation
wait till the motor cool down for around 15 minutes before
rework
Cylinder is jammed
Switch off wait till complete stop. Remove the objects
Cogged belt slipping
Arrange for repair in a specialist workshop
Loose bolts, nuts or other securing
components
Tighten all components, contact specialist workshop if noises
prevail
Cutting blades damaged or worn
Replace a new cylinder or have it checked by an specialist
workshop
Working depth too large
Set to correct working depth
Grass too long
Mow the lawn before aerating
Working depth too small
Set to large working depth
Worn blades
Replace a new cylinder or have it checked by an specialist
workshop
Ejector channel blocked
Empty collection bag and remove blockage
Poor scarification results
Overheat protection actived
Motor does not start
Abnormal noises
Abnormal vibrations
Made in China
2015
Summary of Contents for SCEE16002B
Page 32: ...32 ...
