37
CLEANING AND MAINTENANCE
Attention!
Before performing any work
on the equipment, pull out
the power plug.
> Cleaning
§ Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it with
compressed air at low pressure.
§ We recommend that you clean the device
immediately each time you have finished using it.
§ Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents or
solvents; these could attack the plastic parts of the
equipment. Ensure that no water can seep into the
device.
Never use solvents such as
petrol, alcohol, ammonia
water, etc. These solvents
may damage the plastic
parts.
> Blade maintenance
§ Regularly remove grass and dirt from the blade.
§ At the beginning of the gardening season,
carefully examine the condition of the blade.
§ If the blade is very blunt, sharpen or replace the
blade.
§ If the blade is damaged or worn, fit a new blade.
Warning!
Observe the following
precautions:
§ Disconnect the mower from the mains and wait
until the blade has stopped rotating before
proceeding.
§ Be careful not to cut yourself. Use heavy-duty
gloves or a cloth to grip the blade.
§ Only use the specified replacement blade.
§ Do not remove the impeller (A)for any reason.
> Replacing the blade
«
Fig E »
For safety reasons, we recommend having the
blade replaced by an authorized professional.
Important: Wear work gloves!
Replacement blade, as this will ensure top
performance and safety under all conditions. Carry
out the following steps to change the blade:
§ Turn the mower onto its side.
§ Grip the blade( C) with one hand.
§ Use the spanner supplied to loosen and remove
the blade nut (B).
§ Replace the blade
§ Securely tighten the blade nut.
TECHNICAL DATA
Rated Voltage
230-240V
Rated Frequency
50Hz
Rated Power
1800W
Rotation speed
3200 min
-1
Cutting width
40 cm
Blade
SF7A105
Protection class
Class II
Int. protection degree
IPX4
Collect box / bag
40 L
Cutting heights
25~75 mm
Induction motor
No
Weight
12.4 Kg
Noise emission values measured according to
relevant standard 2000/14/CEE:
Acoustic pressure level LpA
83.7 dB(A) K = 3dB(A)
Acoustic power level LwA
95.3 dB(A) K = 3 dB(A)
Guaranteed sound power
LwA 96 dB(A)
ATTENTION !
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
must be worn.
Weighted root mean square acceleration according
to relevant standard. : 2.92 m/s²
K = 1.5 m/s²
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration total
value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times