MTC 6000
General
6
1.4
Liability disclaimer
All information and data contained in this operating manual have been compiled giving due
consideration to the latest applicable standards and regulations, the state-of-the-art and our
many years of practice and experience.
The manufacturer assumes no liability for damage or injury resulting from:
Failure to observe the operating manual
Use of the equipment for other than its intended purpose
Employment of unqualified personnel
Unauthorised modifications
Technical changes
Use of unauthorised spare parts
In the event of special designs, the ordering of additional options or in line with the latest tech-
nical developments, the actual scope of supply may differ from that illustrated and described
here.
1.5
Copyright
The present operating manual must be treated confidentially. It is intended only for the per-
sons employed to work with the equipment. The provision of the operating manual to third par-
ties without the written approval of the manufacturer is not permitted.
The texts, drawings, fig-
ures and other representations contained are protected by copyright and are subject to the in-
dustrial property rights. Any improper use shall be liable to prosecution.
1.6
Warranty terms
The warranty terms can be found as a separate document in the sales documentation.
1.7
After-sales service
Our after-sales service department is at your disposal for further technical information.
Information on the responsible contact person can be obtained at any time by telephone, fax,
e-mail or via the Internet, see manufacturer's address on page 2.
