Elektron Technology Henson 9000, Quick Start Manual, Page: 2 / 2

Product handling
and set-up
Open the box
If the shock label is red,
please inform the
distributor of this fact.
1
2
3
4
1
3
4
Take the Henson
9000 out of the
box
Always lift and move the
device from the base.
Setup the
Henson 9000
Connect the dual USB
cable, the patient
response button and the
mains cable to the
Henson 9000.
NOTE: Do not connect the USB cables to the computer
until after you have installed the software.
Switch on the
Henson 9000
Software installation
Install the software before plugging in the
dual USB cable between the Henson 9000
and the computer.
Plug in the USB
cables
Once the software is
installed plug in the dual
USB cable between the
Henson 9000 and the
computer.
Plug in the USB device
you will use for database
backups (if required)
Open the Henson 9000
Options program
Double click the Henson 9000 Options
icon on the desktop.
Wait for the program to detect the
Henson and start up.
Click the Computer tab and check there
is a device listed.
Click the Address tab and fill in the practice address details.
Click the Backup tab and make sure the USB flash drive
letter is selected.
Click the Video tab and ensure there is a message saying
“defaults have been downloaded from the Henson 9000…”
If a built in webcam picture is displayed, select the Henson
camera from the drop-down device list.
Click Save.
2
*System requirements
Microsoft® Windows® 7 or 8.X Professional (32 or 64 bit)
Insert the supplied USB
flash drive
Remove all USB devices from
the computer.
Insert the supplied USB flash drive into the computer and
wait for the prompt.
Select Open folder to view files.
Open the folder called Software and double click on the
Software EXE file.
Follow the on screen instructions to install the software.
Open the Henson 9000 software
Double click the Henson 9000 icon on the desktop. (To make
the Henson 9000 software start up automatically when the
computer is started add it to your startup folder)
You will see the Henson 9000 main menu.
5
Installation complete
Note: to save records and use the database you will need
to have the free Adobe® Reader® software installed. This
can be obtained from the website www.adobe.com
For further information on the Henson 9000 and
other ophthalmic products visit:
www.elektron-healthcare.com
Contact us for further information, service and
support on
info@elektron-healthcare.com
Further information