Product handling
and set-up
Open the box
1
2
3
4
1
3
4
Take the Henson
7000 out of the
box
Always lift and move the
device from the base and
never the neck.
Connect the
Henson 7000
Connect the USB cable
to the Henson 7000, the
patient response button
and the mains cable.
NOTE: Do not connect the USB cable to the Pc/Laptop
until after you have installed the Software.
Switch on the
Henson 7000
Software installation
Install the software before plugging in the
USB lead between the Henson 7000 and
the computer.
Plug in the USB
cable
Once the software is
installed plug in the USB
cable between the
Henson 7000 and the
computer.
Further Information
For further information on the Henson 7000 and
other ophthalmics products visit:
www.elektron-healthcare.com
Contact us for further information, service and
support on
Open the Henson 7000
Options program
Double click the Henson 7000 Options
icon on the desktop
Click on the Computer tab and check
that there is a Device listed in the list
box on the page.
Click the Address tab and fill in the practice address details.
Click the Backup tab and make sure the USB flash drive
letter is selected.
Click the Save button.
2
*System requirements
Windows XP Home Edition.
Windows Professional Service Pack 3
Windows 7 Professional.
Windows Vista
Insert the supplied USB
flash drive
Insert the flash drive into the
computer and wait for the prompt.
Select Open folder to view files
Open the folder called software and double click on the
software EXE file.
Follow the on screen instructions to install the software.
Open the Henson 7000 software
Double click the Henson 7000 icon on the desktop. (in
future the Henson 7000 software will start up when the
computer is started as it has already been installed)
You will see this image showing the single and Multiple
Stimulus Supra threshold tests.
5
The software is successfully installed.
Note: to save records and use the database you will need to have
the free Adobe
TM
reader installed. This can be obtained from the
website www.adobe.com