PRE SWITCH MOdE
SUMMER MOdE
Odd-EVEN MOdE
HEATING
TEMP CORRECT
8
7
This function provides for the desired temperature at the desired time.
You do not need to consider when to switch on the heating to be
warm when getting up in the morning without heating up long before
uselessly. You just program the time when you want the desired tem-
perature. In two days’ operation, the thermostat ascertains thermal
constants of the room, and then switches the heating in advance as
necessary. The preliminary switch-on time is limited to 2 hours.
PRELIMINARY START OF HEATING
Choose YES/NO by turning the“ “ and confi rm “
“.
(factory setting of NO)
8
Switching the heating on is not permitted in this mode. Particularly,
this can be used in the summer period, when heating is unnecessary.
After enabling the mode, the “ “ symbol appears on the display.
Note
: The anti-freeze protection (3 °C) is still functional. In this mode,
you cannot change temperature or set the holiday mode!
SUMMER MODE
Choose YES/NO by turning the“ “ and confi rm“
“.
(factory setting of NO)
9
If you choose YES, the PrU and PrL programs will alternate
automatically according to the week (even / odd). This setting
is advantageous, for example, for work in shifts (requirements
on thermal comfort in the object change every week).
EVEN-ODD WEEK SELECTION
(factory setting of NO)
Choose YES/NO by turning the“ “ and confi rm“
“.
10
Setting of the thermostat functions.
HEATING
=
if the current temperature value falls below the desired
one, the output relay (for heating systems) switches on.
COOLING
=
if the current temperature value exceeds the desired
one, the output relay (for cooling systems) switches on.
HEATING / COOLING
(factory setting of HEATING)
Choose HEAT/ COOL by turning the“ “ and confi rm “
“.
11
Used to correct temperature measured by the thermostat. Setting
must earliest be done after 12-hour operation when the internal sen-
sor temperature has settled. Measure the room temperature with a
thermometer. If it differs from the thermostat temperature, set corre-
ction within the range
from -5°C to +5°C
.
TEMPERATURE CORRECTION
Set the correction by turning the“ “ button, and confi rm with
the “
“ button.
(factory setting of 0 °C)
