5
RELAY TEST
SOUNd OF bU
yYES
PROG
Setting the weekly program with up to 6 changes per day.
CONST
Setting the control parameters.
1
2
3
ENGLISH
The hysteresis can be set from 0,1 to 6°C. Example: If the hyste-
resis is 1 °C and the required temperature 20 °C, the thermostat
switches off at 20 °C and on again at 19 °C. By using “
“
buttons set required value and press the “
“ button to confirm.
4
TOUCH SOUND
Press twice the“
“
button
, by using “
“ buttons choose the PROG mode
and press the“
“button to confirm. The number of days to be programmed is
flashing on the display, by using “
“ buttons choose on of the option (you
can program day-by-day or 1-5 = Mon-Fri, 6-7 = Sat-Sun or 1-7 =Mon-Sun) and
press the“ “
button to confirm
.
The 1st change time
starts flashing, by using “
“ buttons set time and
press the“
“ button to confirm. To this time assign with “
“ buttons the
temperature and press again the“
“ button to confirm.
The 2nd change time
appears on the display. Proceed in the same way as with the first change setting.
In
this way, you can set up to
6 temperature changes per day.
To return to
the menu, press the “ “ button. After changing the preset program, check
whether all the changes made conform to your requirements!
It is not necessary to apply all six changes in one day!
Press twice the “
“ button, by using “
“ buttons choose
CONST mode and press the“ “ button to confirm.
Language selection (CZ/PL/EN/DE/RU/SK).
By using “
“ buttons choose languge and press the“ “
button to confirm.
HYSTERESIS
TEST
We recommend you to use the test when you first use the
thermostat!
By using “
“ the test starts and the output relay is switched
on/off several times (the display shows the ON/OFF message)
Pressing the “ “ button, you can view the next constant; to
return to the main menu press the “ “ button.
By using“
„ buttons you can switch on and off the sound of
buttons.
(PROGRAMMING)
(CONSTANTS)
(English language set by default)
(0.5°C set by default)
PROGRAMMING
SELECT dAY
TIME CHANGES
CONSTANTS
ENGLISH
HYSTERESIS
