1. Unpacking
Thank you for choosing the
Elektralite Led Pro Line Cool White Dazer
fixture. For your own safety, please read this
manual before installing the fixture. This manual covers important information on installation and applications. Please keep
this manual for future reference.
To keep this simple, we are going to refer to the fixture as the
Elektralite CW Dazer
throughout the manual.
The
Elektralite CW Dazer
fixture uses 36 high powered 5 watt leds in a balanced arrangement giving incredible output.
Please unpack it carefully and check whether it was damaged in shipping.
The following items should be in the box with the fixture:-
Color/Gel frame
DMX 5 pin male to 5 pin female cable
2. Safety Instructions.
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is
absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. The
Elektralite CW Dazer
is a high voltage fixture. Be careful when dealing with high voltages.
Please read this manual. If you do not read this manual and damages occur to the Elektralite CW Dazer, then it
could void the warranty.
During shipping,
Elektralite CW Dazer
may have been exposed to high temperature changes or humidity changes. So, as a
precaution, do not switch
Elektralite CW Dazer
on immediately. Condensation can damage
Elektralite CW Dazer
so leave
it switched off, until it has reached room temperature.
The electric connection must be carry out by a qualified person and it is
absolutely essential that
the
Elektralite CW Dazer
be
grounded
.
This is imperative and is a safety issue. Do not break or bend out of the way, the ground center pin on the
plug.
Always disconnect the
Elektralite CW Dazer
from the power source, when the device is not in use or before cleaning it. Only
unplug
Elektralite CW Dazer
from the power cord. Never pull out the plug out by pulling on the power cord.
Please keep the
Elektralite CW Dazer
away from children and the general public. Please be intelligent and use common
sense when operating the
Elektralite CW Dazer
.
3. General Guidelines.
The
Elektralite CW Dazer
is a lighting fixture for professional use on stages, in churches, theatres, etc.
The
Elektralite CW Dazer
should only be operated at between 120 to 240 volts and only indoors.
The
Elektralite CW Dazer
should not be operated 24/7 (24 hours a day; 7 days a week). The
Elektralite CW Dazer
needs
operation breaks to ensure that it will work for a long time without problems. Please do not shake the
Elektralite CW Dazer
and avoid using brute force when installing or operating it.
When choosing the location to install the
Elektralite CW Dazer
, please make sure that it is not exposed to extreme heat,
moisture or dust. The minimum distance between the
Elektralite CW Dazer
and the illuminated surface must be more than 3
feet.
Always mount the
Elektralite CW Dazer
with an appropriate safety cable/chain.
Operate the
Elektralite CW Dazer
only when you are familiar with the features on the fixture. Do not permit operation by
persons not qualified to operate it.
All modifications to the
Elektralite CW Dazer will invalidate the warranty. There are absolutely no exceptions.
If
Elektralite CW Dazer
is operated in any way different to the one described in this manual, the
Elektralite CW Dazer
maybe damaged and the guarantee will be void.
Summary of Contents for Cool White Dazer
Page 8: ......