15
WELCOME
INSERT COIN
13.01.
ŞİFRE DE
4.4. Annual Cleaning
Check the boiler, the solenoid, the water distributers etc… in the machine for lime scale. Clean
if needed. Change the parts listed for periodic replacement in the user manual. Check the usage
labels and the physical state of the machine.
5. PRODUCT LOADING AND INITIAL OPERATION
Before connecting your Maxi-Kafe coffee vending machine to the electricity power supply,
proceed with the following;
Open the front door of the machine. There is a water intake hose at the lower section of
the Maxi-Kafe. Insert the water intake hose into a carboy full of water.
Load powder form soluble ingredients into canisters. The ingredients have to be suitable
for vending machines. (See chapter 2.1.2 Product Placement into Canisters)
Load suitable size carton or plastic cups one within another, into the five columns on the
top of the Cup Dispenser Mechanism
The cups have to be slick, not wet and not crushed. Do not mix plastic and
carton cups. To prerevent mechanism breakages, do not force or interfere
with the part where the cup dispencer tines are located.
Plug the machine to an earthed electricity power supply.
When the front door is closed the machine automatically starts working.
Note:
If you need the machine to operate while the front door is open, the safety key lid
has to be placed on the key.
The boiler operates only when the water inside is above a certain level. The status is
displayed on the GLCD once operation starts. If there is not enough water in the boiler,
the pump starts pumping in water. If the Boiler Tank does not fill up within 6 Minutes
then “No Water” message will appear on GLCD. To fill up the boiler tank, switch off the
machine from the mains and switch it on again. Initial heating may take some time.
Once completed ready to operate Message appears on GLCD.
Select the sugar level of your choice and enter the product code to take a product. With
the Payment System equipped Maxi-Kafe, money has to be inserted first.
6- PROGRAMMING
All Programming and Operation controls of
Maxi-Kafe
®
can be done using the
GLCD and the Capacitive Touch Keypad.
SUGAR(+) button EXIT/NO,
SUGAR(-) button SELECT/SAVE/YES,
CUP ONLY button is used to scroll UP in the menu,
HOT WATER button is used to scroll DOWN in the menu
