23
4.1.1 SECURITY LEVEL & SENSITIVITY LEVEL ADJUSTMENTS
ThruScan
s3-s6-s9 :
Consisting of 10 separate security levels (channels), each security level (except for NC levels) can
be set to operate at a different sensitivity level. It is possible to adjust a total of 246 sensitivity
levels from security level 000 (the highest sensitivity) to 245 (the lowest sensitivity).
ThruScan
sX/sX-WP/s15-i/
sX-i :
Consisting of 20/25 separate security levels (channels), each security level (except for NC level) can
be set to operate at a different sensitivity level. 7 / 10 Fixed International Sensitivity Standards
(optional). It is possible to adjust a total of 247 sensitivity levels from security level 000 (the
highest sensitivity) to 246 (the lowest sensitivity). In this very distinctive feature ; The security
Level is defined and assigned by the AD-Auto Designation technique and consequently the relative,
pre-selected “Security Level/Channel” is set. See Section 4.1.3 for further details.
1.
To choose the security level required use
UP & DOWN
buttons then press the
SEL(√)
button
2.
To assign factory settings value or the selected value to the
security level press the
SEL(√)
button
3.
If “ DEFAULT ” is seleceted automatic assignment occurs
and the detector returns to the previous menu
4.
During “ MANUEL “ selection, use
UP & DOWN
buttons to
adjust the security level required then press the
SEL(√)
button.
SECURITY LEVEL
LEVEL 2
020
LEVEL 3
030
LEVEL 4
040
LEVEL 5
050
LEVEL 6
060
NEW VALUE
DEFAULT
050
LEVEL 1
010
MANUAL
NEW VALUE
050
