ELEKTRA VCDR, Installation Manual

Page: 5 / 84

Single-side powered
heating cables
Self-adhesive label
Note:
VCDR heating cables are designed for the rated
voltage 230 VAC, 50 Hz.
Heating cables’ heat output may vary with +5%
and -10% from the label values.
!
The label features the following pictograph:
Note:
Never
cut the heating cable.
Never trim the heating cable, only the power
supply conductor may be trimmed if required.
Never squash the “cold tail”.
Never bend the joint and end seal.
Do
not ever
undertake on your own any at-
tempts to repair the heating cables, and in case
any damage is detected, report the damage to
an ELEKTRA authorized installer.
Never stretch or strain the cable excessively, nor
hit it with sharp tools.
Do
not install the heating cables when ambient
temperature drops below -5°C.
!
5