ELEKTRA SnowTec, Installation Manual

Page: 8 / 84

Heating Mats
ELEKTRA
Controls
A properly selected control system will ensure
adequate operation of the system only during
snow and freezing rainfall. A temperature controller
with a temperature and moisture sensor will
automatically recognize the weather conditions.
The heating system will be then kept on standby
and only switched on when actually necessary.
For this purpose, DIN-bus installed controllers
ELEKTRA ETR2 and ETO2 can be utilised.
Snow & ice protection controls
ELEKTRA ETOG2 controller – max. load up to 3x16 A.
For applications in extended heating systems.
As standard, equipped with one temperature and
moisture sensor and an installation tube. Additio-
nal temperature and moisture sensor can be
connected to this controller, which will enable
protection of two outdoor areas.
ELEKTRA ETR2G controller – max. load up to 16 A,
total output of installed heating cables must not
exceed 3600 W. As standard, equipped with one
temperature and moisture sensor with installation
tube.
8