ELEKTRA Selftec, Installation Manual

Page: 10 / 56

ELEKTRA
SelfTec
®
Installation on pipes
• ELEKTRA SelfTec
®
self-regulating heating cable
should be selected matching the pipe’s length
according to table 1,
• The heating cable should be mounted along the
pipeline in its bottom part with self-adhesive
installation tape fixed every 30 cm. If, basing
on the table, the selected cable is longer than
the heated pipe, the cable should be installed
spirally,
• For plastic pipelines, install self-adhesive alumi-
nium foil on the pipe before fixing the heating
cable. This will improve the temperature distri-
bution on the surface of the pipeline,
10