ELEKTRA Microcasa, Training Manual

Page: 7 / 11

Adjusting the dose
Before changing the dose, make sure all chambers in the dosing
wheel are full and that the coffee has been rolled as described on the
previous page. See page 8 for details of the dispensing unit.
1. Turn the dose adjustment knob
one click to change the dose:
ƒ
To reduce the dose, turn the
knob clockwise .
ƒ
To increase the dose, turn the
knob anti-clockwise .
While making this adjustment, place a
finger or thumb into the dispensing
unit outlet so the wheel is prevented
from turning.
2. After making an adjustment, test
the dose by grinding more coffee
and rolling it to ensure all dosing
chambers are full. Fill a single cup
basket and tamp the grounds, then check if the right quantity of
coffee has been dispensed. Make further adjustments as
required.
Adjusting the dose of coffee
dispensed with each pull of
the dosing lever
Number of doses
The following assumes the dose has been adjusted for the particular
Elektra domestic espresso machine being used with the grinder.
Nivola Micro Casa Mini Verticale
(W only) Semiautomatica Semiautomatica
(all models) (all models)
The above machines need two pulls of the dosing lever to fill a single
basket and three pulls of the dosing lever for a double basket. The
coffee level should be 4–5mm from the rim of the coffee basket after
the grounds have been tamped.
The machine on the right needs one pull of
the dosing lever to fill a single basket and
two pulls of the dosing lever for a double
basket. The coffee level should be 4-5 mm
from the rim of the coffee basket after the
grounds have been tamped.
Micro Casa a Leva
(all models)
Training manual – Grinders
5