ELEKTRA MACINADOSATORE, User Manual

Page: 20 / 40

gb
55
4 FIRST START UP (N)
The following instructions must always be carried out for any new machine or after any long
periods of non-use of machine; failure to carry out the instructions shall render the product
guarantee null and void.
1) Make sure that the button 1 is on the OFF position.
2) Supply the machine with water as indicated in chapter 1.
3) Put the cappuccino foamer 11 in a jug with water, until the two lateral steam outlet
holes are covered. The latter operation is necessary to avoid splashing during
the following automatic cycle carried out by the machine.
4) Select the cappuccino function 20 with knob 9.
5) Connect the electric power plug of the machine.
6) Turn on the machine by pressing the main switch 1 into the ON position.
The machine will emit a 5-second audible sound and will then carry out a 24-second
automatic starting-up cycle with the stand-by light 4 coming on.
This cycle has the purpose of filling the hydraulic circuit with water, as it is emptied after
factory testing to prevent damage during machine storage and transport.
7) Wait for the start-up cycle to end, which is signalled by the stand-by light 4 going off.
8) Stop the cappuccino function 20 bringing knob 9 on the STOP position 21:
at this point the machine is operative and ready for use.
CAPPUCCINO FUNCTION 20 STOP FUNCTION 21 COFFEE FUNCTION 22
FUNCTION KNOB 9