3. Assemble front cover
1. Prepare the base which consists of two halves. Enclose the
screw and rubber feet.
2. Using the base fastening screws, fasten both halves of the base
to the grill. The rubber spacers should be placed between the
grill and base.
3. Attach the two halves of the base then screw the enclosed
rubber foot onto the joint.
4. Set the appliance on a stable and horizontal surface.
5. Make sure the swi
tch is on ‘0’
6.
Connect the unit to the mains only after this has been properly
and completely assembled.
Turning on your Fan and Speed Selection
- To turn on the Fan depress one of the Speed Selection switches.
- Setting 1 is for low fan speed.
- Setting 2 is for medium fan speed.
- Setting 3 is for high fan speed.
- Setting 0 will turn the Fan off.
N.B.
Do not cover the Fan, or place anything over it.
Instructions for Cleaning
Should you need to clean the Fan:
-
Unplug the Fan from the power outlet.
-
Wipe it down with a damp cloth and a small amount of
non-abrasive cleaning agent.
-
Never get the Fan wet.
-
Do not use it if it is wet.
-
Clean the air inlet and outlet regularly. You may use a
vacuum cleaner.
Storage Instructions
Your Fan should be stored in a dry cool place.
After Sales Service
Your Elektra Comfort Fan is not user-serviceable.
If the Fan does not turn on, check to see that:
1. You have followed the instructions properly.
Summary of Contents for Comfort Power Fan
Page 1: ......
