Elekta Neuromag NM21283A, User Manual

Page: 27 / 85

NM21283A-A 21
5
C H A P T E R 5
Description of the menus
This chapter contains descriptions of the menus as they appear in lowest
expert level. For full menu descriptions see “Description of the menus” on
page 61.
5.1 File Menu
The File menu contains commands that are related to saving and loading
of the internal state of the program and the measurement device.
Load tunings
This button enables you to load magnetometer state from a file. The
file must be in the tuner parameter format (.tnp). Using this com-
mand, only the state parameters are loaded, all the rest of the infor-
mation in the file is discarded. See also “About saving and loading
settings” on page 14.
Save tunings
This button saves all currently active parameters into a file. It also
sets the “current” operating point information within the program to
values being used at the saving time. See also “About saving and
loading settings” on page 14.
Preferences
This button opens a dialog box that can be used to set preference
information, like some colors and the expert level. Preference infor-
mation is always saved when program exits.
Exit
Use this button to stop the program. A verification is required to
really stop the program.
5.2 Parameters Menu
This menu contains buttons that pop up dialogs that enable the modifica-
tion of parameters used in various tasks.