WARNING
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
•
Use two or more people to move and install your Wine Cooler. Failure to do so can result in back or other
injury.
•
To ensure proper ventilation of your Wine Cooler, the front of the unit must be completely unobstructed.
Choose a well-ventilated area with temperatures above
60˚ F (16˚C) and below 90˚F (32˚C). This wine
cooler is designed for "indoor" use only. Do not use "outdoors".
•
The Wine Cooler should not be located next to ovens, grills or other sources of high heat.
•
The Wine Cooler must be installed with all electrical, water and drain connections in accordance with
state and local codes. A standard electrical supply (110 V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances is required.
•
Do not kink or pinch the power supply cord of the Wine Cooler.
•
The fuse (or circuit breaker) size should be 15 amperes.
•
It is important for the Wine Cooler to be levelled to work properly. There are 4 adjustable leveling legs
installed on this unit.
•
All installation must be in accordance with local plumbing code requirements.
•
Make certain that the pipes are not pinched or kinked or damaged during installation.
•
Never allow children to operate, play with, or crawl inside the Wine Cooler.
•
Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage or
discolor the interior.
•
Do not use this apparatus for other than its intended purpose.
PARTS AND FEATURES
3
1
Control Panel
2
Levelling Leg (2 pcs)
3
LED Interior Light
4
Wood Shelves (3 full and 1 half)
nd 1 half)
5
Lower Retaining Bar (wire)
Summary of Contents for JC-62
Page 16: ......
