ELEGANCECANADA.CA
13
FOUR SPEEDS ELECTRONIC CONTROLS
BUTTON FUNCTIONS
CONTROLS
• POWER :
Turns the range hood on and off, and activates power-off delay timer.
• DECREASE VALUE :
Decreases blower speed, enters timer mode and decreases timer value.
• INCREASE VALUE :
Increases blower speed and timer value, and resets cleaning reminder.
• BLOWER SPEED INDICATOR :
Displays currentt blower speed (from 1 to 6)
• LIGHT :
Turns halogen or LED lights on and off
• POWER-OFF DELAY DIGITAL TIMER :
Indicates lenght of time left on the delay-off timer.
AUTOMATIC CLEANING REMINDEr
This range hood is equipped with a cleaning reminder that will activate following 30 hours of use.
When the cumulative running time reaches 30 hours, a beep will sound when the blower (motor) starts
to rotate as a reminder to clean the aluminum filter.
After cleaning the filter and when the motor is not in use, press and hold
Increase Value
for three
seconds to reset the timer. Note that turning off the system will not reset the
Power-On Elapsed Timer
.
ADJUSTING THE DURATION OF POWER-OFF TIMER
While the blower is not running, press
Decrease Value
button and hold for 3 seconds to enter timer
mode. Adjust to desired duration of timer (1-15 minutes) by pressing Increase Value or Decrease
Value buttons. This setting is saved immediately.
ACTIVATING THE POWER-OFF TIMER
While the blower is running, press
Power
button and hold for over 3 seconds to activate
Power-Off
Timer
. Countdown begins and when it reaches zero, the blower (motor) will shut down.
ADJUSTING THE BLOWER (MOTOR) SPEED
Press
Power
once to turn the system on. The
Blower Speed Indicator
shows the blower speed level.
Press
Decrease Value
to decrease the speed of the blower from 6 (strongest and loudest) to 1
(weakest and quietest). Press Increase Value to increase the blower speed as desired.
Press
Power
once to turn the unit off.
Light settings are independent from other settings (including power-off delay) and lights must be manually turned on or off.
The system saves user configurations and settings, such as light, timer and blower speed. These will remain the same
the next time the unit is turned on.
OPERA
TION & WIRING DIA
GRAMS
