IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the user of
the product for future reference.
BEFORE USE
You must inspect the product including its cable and plug for any
signs of damage. If the product is damaged, DO NOT use it, and
contact your supplier immediately.
INSTALLATION
1.Attach the aerial to a mast of between 30 mm and 40 mm
diameter (not supplied).
Make sure that there is a
space of at least 500 mm
around the mast for the
aerial to rotate.
2. Extend the telescopic
antenna if VHF radio
reception is required.
3. Connect the aerial to the "antenna" socket on the control unit,
making sure that the cable is not fixed so tightly that it prevents the
aerial from rotating.
4. Connect the television or radio to either of the "TV" sockets on
the control unit.
5. Plug the 230V AC power supply into a 13A socket, and connect
its output lead to the 12V AC input socket on the control unit. The
230V AC power supply must be located indoors.
Note: This appliance will not work from a 12V DC supply.
6. Fit two AAA batteries into the remote control handset.
Page 2