Removable
Euro Block
CONNECTING AMPLIFIER TO SPEAKERS (NOT INCLUDED)
The amplifier can be connected to up to 2 speakers (min. 4Ω)
1. Attach the black cable (terminal end) to the terminal marked with a minus symbol (-) on the
speaker.
2. Attach the red cable (terminal end) to the terminal marked with a plus symbol (+) on the
speaker. Repeat for the second speaker, if using.
3. Remove the euro block terminal (as shown in diagram below)
4. Connect the cable (bare end) attached to the left speaker, to the two left hand connections in
the euro block (observing the polarity). The black cable should be on the left (labelled as 1 in
the diagram below) and the red cable on the right (labelled as 2 on the diagram below)
5. Connect the cable (bare end) attached to the right speaker, to the two right hand connections
in the euro block (observing the polarity). The red cable should be on the right (labelled as 4 in
the diagram below) and the black cable on the left (labelled as 3 on the diagram below)
6. Tighten the screws on the euro block using a suitable screwdriver.
7. Insert the power plug from the power supply into the socket on the amplifier (labelled as 5 on
the diagram below)
8. Plug the power supply into a mains outlet and switch on.
