INSTALLATION AND CONNECTION
1. The ceiling speakers must be fitted by a competent person after a site survey has been carried
out to ensure there are no existing plumbing, gas or electrical services. The provided cut-out
template and appropriate tools should be used to install the speakers.
2. Attach the black cable (terminal end) to the terminal marked with a minus symbol (-) on the
speaker.
3. Attach the red cable (terminal end) to the terminal marked with a plus symbol (+) on the
speaker. Repeat for all four speakers (labelled A, B, E and F on diagram below).
4. Remove the euro block terminal (as shown in diagram below)
5. Connect the cable (bare end) attached to speaker A, to the two left hand connections in
the euro block (observing the polarity). The black cable should be on the left (labelled as 1 in
the diagram below) and the red cable on the right (labelled as 2 on the diagram below)
6. Connect the cable (bare end) attached to speaker B, to the two right hand connections
in the euro block (observing the polarity). The red cable should be on the right (labelled as 4 in
the diagram below) and the black cable on the left (labelled as 3 on the diagram below)
Now repeat steps 4 & 5 for the remaining 2 speakers, connecting to the euro block on the
other end of the amplifier;
Removable
Euro Block
Removable
Euro Block
7. Connect the cable (bare end) attached
to speaker E, to the two left hand
connections in the euro block
(observing the polarity). The black
cable should be on the left (labelled as
6 in the diagram below) and the red
cable on the right (labelled as 7 on the
diagram below)
8. Connect the cable (bare end) attached
to speaker F, to the two right hand
connections in the euro block
(observing the polarity). The red cable
should be on the right (labelled as 9 in
the diagram below) and the black cable
on the left (labelled as 8 on the diagram
below)
9. Tighten the screws on the euro block
using a suitable screwdriver.
10. Insert the power plug from the power
supply into the socket on the amplifier
(labelled as 5 on the diagram below)
12. Plug the power supply into a mains
outlet and switch on.
