INSTALLATION AND CONNECTION
1. The ceiling speakers must be fitted by a competent person after a site survey has been carried
out to ensure there are no existing plumbing, gas or electrical services. The provided cut-out
template and appropriate tools should be used to install the speakers.
2. Attach the black cable (terminal end) to the terminal marked with a minus symbol (-) on the
speaker.
3. Attach the red cable (terminal end) to the terminal marked with a plus symbol (+) on the
speaker. This should be repeated for both speakers (A and B on the diagram below)
4. Remove the euro block terminal (as shown in diagram below)
5. Connect the cable (bare end) attached to speaker A, to the two left hand connections in
the euro block (observing the polarity). The black cable should be on the left (labelled as 1 in
the diagram below) and the red cable on the right (labelled as 2 on the diagram below)
6. Connect the cable (bare end) attached to speaker B, to the two right hand connections
in the euro block (observing the polarity). The red cable should be on the right (labelled as 4 in
the diagram below) and the black cable on the left (labelled as 3 on the diagram below)
7. Tighten the screws on the euro block using a suitable screwdriver.
8. Insert the power plug from the power supply into the socket on the amplifier (labelled as 5 on
the diagram below)
9. Plug the power supply into a mains outlet and switch on.
Removable
Euro Block