Thank you for purchasing an Electrovision adaptor plate. This products is designed to attach to an existing TV
bracket and then offer an increased number of VESA sizes. Please read these instructions carefully and leave
with the user of the product for future reference. If the product is sold on then the instruction/manual should pass
on as well.
BEFORE USE
This kit contains 1 bracket and the accessories listed below. Before attempting installation make sure that the
bracket is not damaged and the appropriate accessories are available. If any damage is detected then do not use
the product and contact your supplier for advice.
PRODUCT SAFETY Installation Advice
1) The installation of this product should only be undertaken by a capable and competent person.
2) Inspect the TV wall bracket you will be fitting this unit too carefully for any damage.
3) Make sure the wall bracket is secure to the wall and can cope with the extra weight of the bracket and the TV
when fitted. The maximum load capacity of this adaptor plate is 35Kg. Therefor the maximum load of the whole
TV bracket is either reduced to this load or if the bracket has a smaller load then to this value.
4) After fitting the adaptor and the TV together make sure that all the screws are tight and secure.
The unit should be periodically inspected for damage and to make the screws are tight.
.
ACCESSORIES INCLUDED
•
M4 x 20 screw (4pcs)
•
M6 x 12 screw (4pcs)
•
M6 x 20 screw (4 pcs)
•
M8 x 25 screw (4 pcs)
•
D6 Washer (4 pcs)
•
Spacer (4 pcs)
•
M6 Nut (4 pcs)
M4 M6 M6 M8
D6 Spacer M6 Nut
Summary of Contents for A195R
Page 3: ...Vesa Sizes Help Chart ...