manualshive.com logo in svg

Electrovision A195FF, User Manual, Page: 3 / 6

Share
Download
Electrovision A195FF User Manual Download Page 3

No

Part

Qty No

Part

Qty

A

M4 x 20mm

4

F

ST8 x 50mm

6

B

M6 x 20mm

4

G

Plug 10 x 50mm 6

C

M8 x 25mm

4

H

M8 Washer

6

D

Spacer

4

I

Spirit level

1

E

Square Washer 4

TV MOUNTING ACCESSORIES

TOOLS REQUIRED

STUD WALL FITTING INSTRUCTIONS

• 

Select a suitable position to mount the arm.

• 

It is recommended that the arm is mounted using the supplied bolts to the wooden 

supports behind the plasterboard. If you wish to mount directly to the plasterboard a 

survey of the plasterboard must be taken by suitably qualified installers and the correct 

mounting hardware must be purchased. The bolts and plugs provided are not suitable 

for this purpose.

• 

Use a stud detector to locate the centre points of a suitable wooden support.

• 

Attach the spirit level (I) to the frame.

• 

Place the arm against the wall and mark the holes required. Use the spirit level (I) to 

keep the frame horizontal. 

• 

Drill pilot holes 3mm diameter by 50mm deep in the supports.

• 

Attach the arm to the wall using the 6, 8x50mm bolts (F) and M8 washers (H), the 

bolts should be tightened using  a 12mm / 1/2 inch socket wrench or spanner. 

F

H

I

Summary of Contents for A195FF







Reviews:

No comments