5.17 Inserting a CF (Compact Flash) Card
Before inserting a CF Card, read the documentation that came with the card to see if it has
any special requirements.
To insert a CF card:
1. Locate the CF Card slot on top side view of the Scribbler.
2. Insert the CF Card
3. When the card is almost all the way into the slot, push firmly, but gently, to ensure a
firm connection with the scribbler has been made. Avoid forcing the card into
position.
4. The CF card eject button will pop up
5.18
Removing a CF Card
1. Locate the CF Card eject tab.
2. Push the eject button again so the card will pop out.
3. Hold the CF card by the edges and slide it out of the slot.
5.19 Biometrics – Fingerprint
The biometrics option is available with the SC800 model. You have to enroll your
fingerprint before you can use the biometrics option in the Scribbler
1. Tap on start
2. Tap on All Programs
3. Tap on Softex and then on OmniPass Enrollment Wizard
4. Once the Wizard appears tap on Enroll
5. Enter a password and store it in a safe place
6. Click on next
7. Choose a finger by tapping on the finger you wish to enroll
8. Place the finger on the sensor and remove it
9. Do this again for a total of 7 times
10. You will have to verify your finger for the last time
11. Tap on Finished Enrollment
To administer fingerprints and passwords
1. Tap on start
43
Summary of Contents for Scribbler SC300
Page 1: ...1 ...
Page 59: ...Appendix 59 ...
