Using Your Scribbler
15
4.
Proceed with fingerprint registration.
Please apply appropriate pressure to the
surface of the fingerprint recognition
device. You must correctly enter your
fingerprint at most eight times before
fingerprint verification can be completed.
Place your finger on the sensor and hold
it there until the green light below the
fingerprint recognition display stops
flashing. Remove your finger and then
place it on the sensor again, repeating the
process until the message that you have
completed registration is displayed.
5.
After successfully entering your
fingerprint the required number of times,
the "Verify Fingerprint" screen will appear
automatically.
6.
Carry out the final fingerprint recognition
confirmation, and you will have completed
the
process.
Green indicates successful fingerprint registration. Red indicates unsuccessful
registration.
