8.Error Tc
Cell over temp. > 60
℃
9.Error Tb
Boost over temp. > 100
℃
10.Electrovaya
-Pack start up
-Low battery capacity (< 10% )
-Pack locked
11.OFF
Shown after button press 3 seconds
12.Error USB
Over current on USB port
13.Error IC
Charge current over 5A/10 sec
14. Error Oc
-Discharge current over 12A
-Power output >100W for 10 sec
15.Error Ov
Cell over 17V
16.Locked Pack
locked
17. Please charge
battery capacity
18. No Smart Tip
No smart tip plug
(*1) ST : smart tip
OPTIMIZING BATTERY LIFE
1. Charge the PowerPad immediately.
2. When not in use for a month or more, charge the PowerPad prior to storing. Monitor the
PowerPad during storage, and if needed, recharge to maintain capacity.
3.
After a period of time, the PowerPad will lose its ability to perform at maximum capacity and
will need to be replaced. This is normal for all batteries.
TROUBLE SHOOTING
Under abnormal operating conditions, such as extreme temperature conditions, the PowerPad will
not charge or discharge
.
Problem Solution
If charge level is equal or less than 10%
User need to plug an AC adaptor to wake
up the Powerpad
Error USB
Confirm devise USB output voltage
(5V/1A), then, Need to restart the power
pad
“Discharging USB “
Plug cable
Only show “Charging “ without voltage
showing
Check ST output and AC adapter voltage.
Make use match each other
