Page 13 of 24
RS1000 Instruction Book M7239. Issue 4.3
7.7. Timer set function.
The maximum time setting is 99 hours and 59 minutes.
Note:
Once the timer has been set it will not commence count down until the Heater on/off
key is activated.
7.7.1. From the main display screen press the
^
key.
7.7.2. Press the
^
or
v
to make the 10’s hours selection. Press the
>
key to go into unit hours
selection screen.
7.7.3. Press the
^
or
v
to make the 10’s minutes selection. Press the
>
to go back to main
display screen.
Note:
If 10 seconds elapse without a key being pressed the display is to return to the
main display screen.
7.7.4. With the timer set the front screen will display only count down hours until only minutes
are left on the time counter, then minutes are to be displayed. The front screens will
look like this.
h
denotes hours and
m
denotes minutes. When the time counter reaches
zero the heaters are turned off. The Heater on Red LED is extinguished and the main
display screen reverts to
^
t. A 1 second beep is to be sounded when heaters are turned
off in timer mode.
Note
: The timer will not commence count down until the set temperature has been
reached and the Red LED is constant.
