STEP 8 – Boxing
Now that the electronics are finished, let’s prepare the enclosure.
The Germanium Fuzz uses a standard Hammond 1590B. You can use a pre-drilled
box or drill your own using the 1590B Germanium Fuzz Stencil.
Use a cutter to separate the stickers and place the black pad on the bottom:
Place the 2 plastic insulators (one need to be cut following the stencil) using double
side tape, they will protect the electronics:
Leave the battery
area free from
insulation
Cut
following
the stencil
At the last page of
this document, you
can see how the
stickers are placed.