Electrorad HPH01-05E, Instruction Manual

Page: 3 / 16

3
recommended by the manufacturer. This can be
dangerous and may damage the heater.
Ÿ Never repair the unit yourself. Otherwise you will lose
the benefit of the guarantee. Like any electrical
appliance, it must be repaired by a qualified person. If
the power cable is damaged, it must be replaced by the
manufacturer, the service agent or similarly qualified
person in order to avoid danger.
Ÿ A repair involving the opening of the radiator can be
made by the manufacturer.
Ÿ Do not use this heater with a programmer, timer,
separate remote-control system or any other device that
switches the heater on automatically, since a fire risk
exist if the heater is covered or positioned incorrectly.
Ÿ Disconnect from mains when not in use or cleaning. The
timer will need re-setting.
Ÿ It is not recommended to use an extension cord.
Ÿ The heater is hot when in use. To avoid burns, do not let
bare skin touch the hot surface.
Ÿ
Do not immerse cord, plug or any part of the appliance
in water or any other liquid.
Ÿ
Do not use the heater in dusty environments or where
flammable vapours are present (e.g. in a workshop or
garage).
Ÿ Do not place the heater on or near any other source of
heat.
Ÿ Do not use this heater in the immediate surroundings of
a bath, a shower or a swimming pool.
Ÿ Do not let the mains lead hang over the edge of the
table or work surface or touch hot surfaces.