22. Now push “Exit” You should now be up and running.
21. Now press “OK” and using your left and right arrows on your remote control select “Astra 28.2E”
If not the main things to check are:
1. Check that the LNB Skew is correct
2. Check that the elevation is correct
3. Check all of the connections are solid
4. Check that there is nothing inbetween the LNB and the sky, a good
way to do this is to look along the top of the LNB like it is a sight
5. Check that the disply (i.e TV screen) is set to the appropriate input
channel
20. Now again check the signal quality and intensity by pressing “info” , if over 80% intensity and 65%
quality, press “info” to view. If you have high intensity but not so high quality there is most likely an
obstruction between the dish and the satellite, i.e. trees
electronics
WORLDWIDE
Electronics Worldwide Ltd
PO Box 1038, Warrington, WA1 9BS
Technical Support: 0906 700 10 20
Email: [email protected]
(All calls to this number are charged at 50p/minute)
