4
Step 5: Secure the Antenna to its
support structure
A Universal Mounting Clamp Kit is included with
the antenna for ease of mounting to the tower
leg. The kit generally eliminates the need for any
additional brackets, however chain and “J” bolts can
be ordered for larger pole installations.
Step 5
Step 4: Attach the Feed Strap
Loosen the feed insulator wing-nut and
1.
swing the strap from the shipped position
(perpendicular to the Boom) to where the
strap engages the Grounding Ring’s protruding
threaded studs (set-screws).
Fasten the strap to the two threaded studs; a
2.
proper connection is obtained when the strap
is sandwiched between the two stainless-steel
flat washers, lock washer and 5/16 inch wing-nut
removed in Step 1. The Grounding Ring Wing-
Nut is secured using 8 lbf·ft (11 N·m) of torque
applied to the wing-nut.
Hand tighten the Insulator wing nut taking care
3.
not to exceed the 3 lbf·ft (4 N·m) torque rating.
Step 4
Feed insulator wing-nut
Grounding Ring Wing-nut