-6-
2.3 Keyfob Functions
The EL-2648 supports two types of keyfob transmitter, EL-2611 and EL-2614. You can register up to
16 keyfobs to the stand-alone receiver. Figure 7 illustrates these transmitters and the functions
assigned to their buttons.
EL-2611
EL-2614
Figure 7: Keyfob Button Assignments
3 Programming
This section explains how to program the receiver, register and delete transmitters, and configure the
settings for outputs and functions.
General Notes
x
All programming and transmitter registration is performed using the
and
navigation keys
and SELECT (tamper switch) located beside the LCD.
x
Menu mode automatically terminates 15 minutes after the last keystroke.
x
Pressing
and
together enables you to move up a level in the menu or to exit a
programming option without saving any changes.
x
Hold down the tamper switch for at least five seconds to exit Programming mode.
To program the receiver:
1. Disarm the control panel to which the receiver is connected.
2. Remove the front cover of the receiver.
3. Press
and
together to enter programming mode;
MAIN
,
TESTS
appears on the display.
4. Press
to scroll through the menu until the required function appears on the display (
enables
you to scroll backwards).
5. Press SELECT to select the function or press
and
together to cancel the procedure.
6. To exit Programming mode, select
MAIN
,
EXIT
from the menu or hold down the tamper switch for
at least five seconds.
Note: When the receiver is in Programming mode all the outputs function as normal with regard to
the control panel. For example, any device that detects will still activate the relevant output even
though the receiver is in Programming mode.
Panic
Disarm
Panic -
when pressed
together
Arm
