EL 400 DRO
68 |
P a g e
10. Auxiliary Functions
10.1. Touch Probe Functions
Touch probe also called as Contact probe is a device which gives
a trigger signal when it comes in contact with the work-piece. The
EL 400 DRO uses this trigger signal to execute certain functions
which helps the operator to set an axis or measure a work-piece.
Probe functions are categorized into following categories:
10.1.1.
Basic Settings:
DRO Type:
The DRO can be configured as “DRO T” and
“DRO F” in setup mode. The “DRO T” mode flashes the
probe message on trigger
. And the “DRO F” freezes the
coordinates on trigger.
Probe Delay: This delay is provided to avoid multiple probe
trigger during measurement. The user can set value
between 1 second to 60 seconds.
o
Enter Auxiliary setup
menu.
…
…
Toggle using
key
and
key.
Enter Auxiliary setup
menu.
…
…
