- 9 -
maintaining the data, the meter will automatically number and store the currently
held data, display the group number such as
“
NO:002
”
, and the meter can store
up to 500 sets of data. If the storage is full, the
“
FULL
”
symbol is displayed.
3
．
Data Review
、
Exit
Press the
READ
key in the test mode to enter the data reference mode, the
"
MR
" symbol displays, and start reading from the "
NO:001
" group data. Press to
view the increment by step, and press to increase the increment by 10 steps.
Press the key to decrement the step size by 1, and press and hold the key
for a step size of 10 to decrement. Press the MODE key to switch to view the voltage,
current and phase, active power, reactive power, apparent power, power factor,
frequency, and saved display interface. Press
READ
to exit data review mode and
return to test mode.
4
．
Data Delection
Press
HOLD
key to enter the data deletion option in data review mode or
test mode, press key to select
“
YES
”
, press key to select
“
NO
”
,
and return to test mode after selection.After power o
After power on, long press the
HOLD
button to control the backlight, suitable
for dim places.
5
．
Test Display Mode Switching
After power on, the meter automatically enters the voltage and current test
display mode (Figure 1); press the
MODE
key or press the and keys to
switch the phase, active power, reactive power, apparent power, power factor,
frequency, test display mode (As shown in Figure 2, 3), and figure (3) two-line
power, power factor is U1I1, U2I2 corresponding power and power factor.
Summary of Contents for ES2010E
Page 1: ... 0 ...
