Pag. 30
SIRIO 2000T
SIRIO 2000T
SIRIO 2000T
SIRIO 2000T
SIRIO 2000T
Electronic Broadcast Equipment
Level 3: Highest security level.
It is always "on" by default and resets anyway to "on" after the display
time-out, for security purpose. Its knowledge is deserved only toa
very few
individuals and must
be immediately entered after set up and kept in a safe place:
there is no way to read it
after
you have set it and confirmed into the transmitter.
This password must be
immediately
changed at the first pre-set of the transmitter: if any
unauthorised people tamper with it or you lose it, there is no way to recover or change it. If you
do not know the correct word the transmitter may become unmanageable.
Access to the transmitter will then require factory reprogramming or changing of the
internal CPU
.
For any parameters that may require some setting in the field, the 2nd level password is enough
and may be used for any standard service requirement. The main purpose of the existence of the
3rd level is a security assurance for the user if he loses control on the lower level password.
Only very few critical parameters, like limiter permission or control require this password, as in
some countries this functions are not allowed to be freely chosen.
6.2 FACTORY DEFAULT PASSWORDS
These are the factory default password:
Level 1:
P001
Level 2:
P002
Level 3:
ABCD
According to what previously said, be sure to change at least the 3rd, and possibly the 2nd level, as soon
as you receive and turn on the transmitter.
For security purpose the 3rd level password may be factory changed from the default value before the
transmitter is shipped, in consequence of a specific customer request.
