1.4 Installing the Shelves
Adjust each shelf position by inserting the shelf support
clips into the slots at the desired level. Make sure that the
shelves are secure before placing product on them.
If the unit is equipped with drawers, press the release but-
ton on the bottom of the drawer to open. The drawer positions
are also adjustable.
Do not place anything on the floor of the cabinet.
1.5 Start-Up Procedure
1. This unit is equipped with a circuit breaker on the side
or back. Turn this switch ON before starting this unit.
See illustrations below for breaker switch location.
2. Connect to a dedicated power source.
Note:
When the unit is plugged in and the power switch turned
on, the audible alarm may sound. To temporarily silence the
alarm, open the control panel door and press the
BZ
button.
3. The factory setpoint for chamber temperature is 5°C.
Allow the unit to cool down to setpoint. The chamber
temperature is displayed on the temperature indicator
display on the control panel.
Note:
Although the refrigerator will operate at under 2°C, it is
not suitable for prolonged use at this range. Always set the ther-
mostat above +2°C. When running the unit at the top of the
range (+14°C), the audible alarm may sound. In this case, it
does not indicate a malfunction. Press
BZ
on the control panel
to silence the alarm.
4. Turn the light switch to ON to verify its operation, then
turn it off for normal operation.
5. Make sure that the unit functions properly before plac-
ing product in the chamber. Add product to the chamber
gradually
to prevent excessive temperature rise and sub-
sequent activation of the alarm system. Allow enough
space between the items to permit adequate air circula-
tion.
Model 3680 Series __________________________________________________________________Installation and Start-Up
1 - 2
Model 3684, 3686 and 3687
Model 3684, 3686 and 3687
