ELECTRON S.A. reserves the right to change or alter any information contained in this manual without prior notice.
MEMORY Button
Select the memories or the channels that you want to adjust from the 12 presets. When
the LED indicator above this button, is turned on, you can adjust the memories. If it is
turned off, you can adjust the channels.
MEMORY
MODE Button
Select one of the three operating chaser modes. The LED indicators, above this button,
indicate the mode that is active.
MODE
Twelve-channel chaser.
2 six-channel chasers.
4 three-channel chasers.
FUNCTION Butt
ο
n
Select one of the three chase functions. The LED indicators, above this button, determine
the function that is in operation.
FUNCTION
Right chase
Left chase
Right – Left chase
Button 6 / 6
By pressing this button, you can choose the channels, where the chase will run. The LED
indicators, above this button, indicate the channels that the chase runs.
Chase runs channels 1 - 6.
6 / 6
Chase runs channels 7 - 12.
Chase runs all console`s channels.
FLASH Button
Press one or more of these buttons in order to increase (depending on how long you press
the buttons) to 100% the level of the channel (when LED indicator above the memory
button is turned off) or the level of the memory (when LED indicator is turned on).
FLASH
MEMORY PROGRAMMING
1. Press
MEMORY
button for about 4 sec. The LED indicator, above the button, will start blinking.
2. Adjust the desirable levels on the sliders.
3. Press
the
STORE
button. The two leds above the button will start blinking, which means that the
console is ready to store the levels that you have adjusted in the selected memory.
4. Press one of the
FLASH
buttons in order to store the adjustments to the corresponding memory. The
two leds above the
STORE
button are turned off.
5. Repeat
steps
2, 3, 4
in order to program more memories.
6. Press
MEMORY
button for about 4 sec. in order to complete the programming procedure.
Summary of Contents for TEMPO 12
Page 1: ...ΤΕΜΡΟ 12 USER S MANUAL ...
Page 5: ......
