VERIFICATION OF SELECTED PROGRAMS
To visualize or modify selected programs press
M
to position the cursor
PROG
. The cursor above
the day of the week will begin to scroll from 1-7, displaying the program set up for each day of
the week. In this condition you can modify the set program by pressing the
+
or
–
buttons and
repeating the operations described above (points 2 – 5).
To exit the visualization of programs, press
M
.
MODIFYING HOURS OF PROGRAMS P1 E P2
If the factory set hours of the programs
P1
e
P2
are not satisfactory, you can modify them.
e.g. modifying
P1
hours:
1.
Pressing the
M
button, position the cursor
on
PROG
. The cursor above the day of the
week will begin to scroll from 1-7, displaying
the program set up for each day of the week.
2.
Press
+
or
–
and select
P1
.
P1
begins to
flash.
Hold down
M
for 6 seconds.
3.
the starting hour of
P1
( 6:00) begins to
flash. Press
+
or
–
to modify the starting hour.
Each press of
+
or
–
will vary the hour by 30
minutes.
Press
M
to set the hour.
Sira Onice - INSTRUCTIONS FOR USE
English
11
