ASA101A User Manual - work in progress
15 / 17
Connecting Instrument
To connect to the instrument you can use the options in the MENU or the button on the CONTROL
RIBBON.
INSTRUMENT > CONNECT
to connect, or
DISCONNECT
to disconnect.
or
Before the instrument connects it will check the identification in the FTDI USB bridge IC, an error message
will be shown if the instrument selected is not the same as the instrument connected.
Technical Note
Upon successful connection, EPIC will download the calibration
coefficients file from the USB bridge IC. These are then stored in the
EPIC folder as "ASA_cal.txt"
