18
page
LOCK/UNLOCK
A PROGRAM
To lock or unlock a program, simultaneously press the down arrow of program 2 and the
PR
button of program 2 for 10 seconds. You will see the
lock symbol, illustrated above, in the section to the left.
• To change the lock status: use the down arrows to confirm the operation.
• If the lock symbol appears: program locked, cannot be changed.
• If the lock symbol does not appear: program unlocked; the user can change the program.
*Do the same operation to unlock the program
TIMER
CHANGE THE LENGTH OF TREATMENT 0-60 MINUTES
• Press the Timer button and the timer will blink.
• The device will count down the elapsed time and will automatically stop once the time has run out
• For the continuous treatment option, without interruption, keep pressing until the signal
C
appears. You will need to stop the device yourself
when you think the treatment has been long enough. Confirm your selected option by pressing the
S
button to save or press the arrow
to start treatment
STOP/PAUSE
DURING A PROGRAM
STOP
PAUSE
MANUAL CONTROLLER (
MANUAL Ctrl
)
FOR
NMES
ONLY
•
To use the manual controller, connect the wire on top of your stimulator.
The message (MANUAL Ctrl) will appear on your screen.
•
By pressing on the button, you will be able to manually control your muscle contractions.
(Work Phase/Rest Phase)
3.3
3.4
3.5
3.6
To stop stimulation, reduce the intensity with the down arrow until the intensity returns to 0.00 or
press the On/Off button.
At any time during treatment, you can pause for 5 minutes.
•
If the device is locked, unlock it by pressing the down arrow then pressing Pause
•
The timer will stop while paused as desired
•
To resume treatment, press Pause again
