12
Part 1 - INSTALLATION INSTRUCTIONS
1 - Fixing with screws
Using the cardboard template,
mark and drill the holes on the
wall (2 holes Ø 8 mm see
instructions on the template),
insert the plugs in the holes,
tighten both 4,2 x 44,4 screws
(supplied) leaving about 5 mm
unscrewed, hook the hood onto
the screws
(fig. 1)
and secure
tightly from inside
(fig. 2)
. Mount
the safety square (supplied) above
the hood
(fig. 3)
.
2 - Fixing with brackets
Using the cardboard template,
mark and drill the holes on the wall
(4 holes Ø 8 mm see instructions
on the template), fix the metal
brackets with screws and plugs
(supplied), hook the hood onto the
brackets
(fig. 4)
. Fix the hood with two knobs (supplied)
(fig. 5)
. Make sure the hood
is level and, if necessary, adjust by acting upon the adjustment screws
(fig. 6)
.
3 - Respect warning 2.5.
1
1
1
2
2
2
3
3
3
4
4
4
401_05a
5
5
5
6
6
6
