background image

11

How To Replace Bags–Style E82 or Reusable Cloth Bag

 (on some models)

NOTE:  Turn off the switch and unplug the electrical cord before changing bag. Never operate the vacuum              
cleaner without the bag or the fi lter.

It may be more convenient to lower the handle to the fl oor before changing the bag.

To Remove Bag:

Front

Cover 

Latch

A.  Remove front cover. Press down 

on front cover latch and lift cover 
away from cleaner.

B.  Grasp bag collar and pull straight 

out of bag compartment. Dispose 
of used paper bag.

 

If you have the reusable cloth 
bag, slide bar closure off the 
bottom of the bag to open bag. 
Empty in trash receptacle.

To Replace New Bag:

C.  If you have the reusable cloth bag, fold bag to original 

size then slide the bar closure back on the bottom of 
the bag to close. 

 

Align bag inlet hole and inlet tube. Push bag straight 
onto tube.

D.  Tuck bag into bottom and along sides.

E.  Replace front cover. Make sure bag does not catch 

under front cover. Place the tabs on the bottom of the 
front cover into slots at bottom of bag compartment 
and press cover against unit until it clicks shut.

Bag 
Collar

Use GENUINE Elextrolux Replacement Parts.

Your cleaner may come with a 
disposable paper bag or a reusable 
cloth bag. Both bags are removed 
and installed into the cleaner in the 
exact same way. 

Disposable 
Paper Bag

Reusable 
Cloth Bag

Bar 
Closure

Summary of Contents for Z2270 Series


















Reviews: