hose intake (9)
. See fig. 9.
7. Connect the
hose (10)
to the
bucket (5)
by fitting the threaded
end of the
hose (10)
into the
hose intake (9)
and turn in a
clockwise direction to secure.
See fig. 10.
8. Fit the
extension tubes (13)
and
other accessories (whichever is
required) to the
hose (10)
. See
fig. 1.
NOTE:
The
carpet/floor nozzle (14)
has two settings. Each can be
selected by using the foot-operated
switch on the left hand side of the
nozzle.
•
When cleaning hard floors, the
bristles should be in the extended
position.
•
When cleaning carpets the
bristles should be in the retracted
position.
9. Once all the required accessories
have been fitted together, plug
the mains lead into the wall
socket and press the
on/off
switch (2)
to start vacuuming.
See fig. 11.
NOTE:
You can control the amount
of suction that you require by
opening and closing the
suction
regulator (12)
which is conveniently
placed on the
curved handle (11)
.
See fig 12.
HOW TO USE YOUR MACHINE
AS A WET CLEANER
1. Assemble your vacuum cleaner
using the components shown in
fig. 2.
2. Fit the
foam filter (16)
ensuring
it completely covers the float
cage. See fig 13.
Fig. 12
Fig. 11
Fig. 10
7
Fig. 9
Fig. 13
