18
Installation manual
8 Drain Connection
Connect the machine's drain hose to the back of the washer, using the spring clamp provided in the accessories
package. Avoid sharp bends in the hose which may prevent proper draining.
You can connect the drain hose to a sewer stand pipe. If you do this, make sure that the outlet hose will not come out
of the stand pipe.
You can connect the drain outlet to a sink or basin. If you do this, make sure the outlet hose will not come out of the
sink or basin.
A
B
C
D
fig.W01603
A
47.2 inches (120 centimeters) maximum
B
30 inches (76 centimetres) minimum OR placed directly in a drain basin or trough making sure the end of the hose is never
submerged.
C
Machine
D
Drain outlet hose
Electrical installation must be carried out by licensed, qualified personnel!
All optional equipment connected must be EMC-approved to EN 61000-6-1 or EN 61000-6-3.
